top of page

AVAILABLE SIZES:

Ultra-Jaw "UJ1" & "UJ1X"

PRODUCT INFORMATION:

​

The Ultra-Jaw "UJ1" Bucket is made for Farm, Utility, and Light Industrial loaders, designed to handle lift capacities ranging from 2,000 to 3,000 pounds. With width options spanning from 60 to 76 inches, these buckets offer generous capacities, holding between 14.7 to 19.2 cubic feet. This versatile bucket excels in bulldozing, grappling, grading, loading, and a wide range of additional applications.

 

UJ1 KEY BENEFITS:

 

  • Three high carbon steel blades, two on jaw, one on bulldozing moldboard

  • Bulldozer blade is reversible bolt on

  • Heat treated bushings with stress proof zinc plated pins

  • Specifically engineered to open wider than the average 4-N-1 bucket on the market

  • Jaw opens to 45 inches

  • Cylinders are shielded front and rear

  • Two clean out rods are mounted on each hydraulic cylinder to prevent material from packing between bucket and cylinders

  • Comes standard with two 50” long hoses and a set of ½’’ pioneer ag style quick couplers. 3/8” Pioneer Ag style quick couplers, 3/8" Flat Face, and 1/2” Flat Face quick couplers are also available upon request.

 

​Options:

​

The Ultra-Jaw "UJ1X" Bucket is engineered for Farm, Utility, and Light Industrial loaders, built to handle lift capacities from 2,700 to 4,000 pounds. Offering a range of widths from 72 to 84 inches, these buckets capacities range from 18.1 to 21.5 cubic feet. This versatile bucket excels at bulldozing, grappling, grading, loading, and a wide range of other tasks.

 

UJ1X KEY BENEFITS:

 

  • Three high carbon steel blades, two on jaw, one on bulldozing moldboard

  • Bulldozer blade is reversible bolt on

  • UJ1X models have a pre drilled cutting edge to easily add a bolt on cutting edge

  • Heat treated bushings with stress proof pins zinc plated pins

  • Specifically engineered to open wider than the average 4-N-1 bucket on the market

  • Jaw opens to 45 inches

  • Cylinders are shielded front and rear

  • Two clean out rods are mounted on each hydraulic cylinder to prevent material from packing between bucket and cylinders

  • Comes standard with two 50” long hoses and a set of ½’’ pioneer ag style quick couplers. 3/8” Pioneer Ag style quick couplers, 3/8" Flat Face, and 1/2” Flat Face quick couplers are also available upon request.

​

Options:

bottom of page