How to Select your 4-n-1 Bucket

W.R. Long Inc. Quality Line of Loader Attachments.

Made to fit more than 750 makes and models

Tooth Bar & Wear Blades

How to Select Your 4N1 Bucket

Items In Stock

Photo Gallery

How to Determine the correct Bucket for Your Loader

W.R. Long rates our 4-N-1 buckets based on the bottom center of the bucket at full height. Some loader manufactures give the loader capacity at the bottom center at full height and some will give the loader capacity at full height at the pivot pin, 500 mm from the pivot pin, or 800 mm from the pivot pin. If your loader is rated at 1,530 lbs. at the pivot pin and 880 lbs. at 800 mm from the pivot pin then you could take the average of these two numbers and come up with a rating of 1,205 lbs. This rating would fit the UJ2 bucket.

Tractor Loader Capacity (Lbs)	W.R. Long 4N1 Bucket
450 to 900	HJ2L
800 to 1,100	HJ2
1.100 to 2,000	UJ2
2,000 to 3,000	UJ1
2,700 to 4,000	UJ1X
2,500 to 3,500	UJ
3,000 to 5,000	UJX
up to 6,500	HJHI
1,100 - 2,200	GPL - Grapple
2,000 - 4,000	GP - Grapple
500 - 1,400	RBG2 - Root Rake Brush Grapple Light
1,400 - 3,800	RBG - Root Rake Brush Grapple

Skid Steer Operating Capacity (Lbs)	W.R. Long 4N1 Bucket
1,000 to 2,500	HD
2,250 to 4,000	HDX
800 - 1,500	GPL - Grapple
1,500 - 4,000	GP - Grapple
800 - 3,000	RBG - Root Rake Brush Grapple

How to Determine the correct Bucket for Your Loader

W.R.Long Inc. Tarboro, NC 252-823-4570